Are you looking for a option to enhance the safety of your house? Are you looking out for an clever doorbell that can allow you to regulate your entrance door regardless of the place you’re? Chances are you’ll now relaxation straightforward realizing that the Ring Doorbell is the reply to all of your queries. This text will stroll you thru the method of organising your Ring Doorbell step-by-step, guaranteeing that you’ve got a stress-free expertise.
Earlier than we begin, ensure you have the next instruments and supplies readily available: a drill, a screwdriver, a stage, a hammer, a pencil, and a tape measure. To put in your Ring Doorbell efficiently, additionally, you will want the next: a Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver. Upon getting collected the entire mandatory provides, you may start organising your Ring Doorbell.
Armed with the required instruments and supplies, you are now able to dive into the set up course of. Don’t fret, we’ll break it down into manageable steps so you may take pleasure in peace of thoughts realizing you have secured your house’s entry level.
Learn how to Set up Ring Doorbell
Earlier than you begin the set up, ensure you collect all the required instruments and supplies, together with the Ring Doorbell, mounting bracket, doorbell transformer, doorbell wires, drill, screwdriver, stage, hammer, pencil, and tape measure.
- Flip off energy to doorbell.
- Take away present doorbell.
- Set up mounting bracket.
- Join doorbell wires.
- Mount Ring Doorbell.
- Stage and safe Ring Doorbell.
- Restore energy to doorbell.
- Check Ring Doorbell.
Upon getting put in your Ring Doorbell, obtain the Ring app and observe the on-screen directions to finish the setup course of. You may then use the app to regulate your Ring Doorbell and obtain notifications when somebody rings your doorbell or triggers the movement sensor.
Flip off energy to doorbell.
Earlier than you start putting in your Ring Doorbell, it’s important to show off the facility to your present doorbell. This may forestall any electrical shocks and guarantee you could work safely.
-
Find your doorbell breaker.
That is often situated in your house’s electrical panel. The doorbell breaker is often labeled “Doorbell” or “Chime.”
-
Flip off the doorbell breaker.
Upon getting discovered the doorbell breaker, flip it to the “Off” place. This may reduce off energy to your doorbell.
-
Check the doorbell.
Press the doorbell button to make it possible for it’s now not working. If the doorbell nonetheless rings, then you haven’t efficiently turned off the facility. Test the breaker once more and make it possible for it’s within the “Off” place.
-
Take away the quilt out of your doorbell chime.
Upon getting confirmed that the facility is off, you may take away the quilt out of your doorbell chime. This may expose the doorbell wires.
Now that you’ve got turned off the facility to your doorbell, you may safely proceed with the set up of your Ring Doorbell. Keep in mind to at all times observe the directions supplied within the Ring Doorbell consumer guide.
Take away present doorbell.
Upon getting turned off the facility to your doorbell, you may proceed with eradicating the present doorbell. This course of will fluctuate relying on the kind of doorbell you could have.
-
Take away the doorbell button.
The doorbell button is often held in place by one or two screws. Use a screwdriver to take away the screws after which gently pry the doorbell button off the wall.
-
Disconnect the doorbell wires.
Upon getting eliminated the doorbell button, you will note two wires related to the again of the button. These are the doorbell wires. Use a pair of pliers to twist the wire nuts counterclockwise after which pull the wires aside.
-
Take away the doorbell chime.
The doorbell chime is often situated inside your house, close to the entrance door. Take away the quilt from the chime after which disconnect the wires from the chime terminals. As soon as the wires are disconnected, you may take away the chime from the wall.
-
Patch the holes.
Upon getting eliminated the doorbell button and chime, you’ll be left with two holes in your wall. You may patch these holes with spackling compound or caulk.
Now that you’ve got eliminated the present doorbell, you’re prepared to put in your Ring Doorbell. Be certain to observe the directions supplied within the Ring Doorbell consumer guide.
Set up mounting bracket.
The mounting bracket is what’s going to maintain your Ring Doorbell in place. It is very important set up the mounting bracket accurately, in order that your Ring Doorbell is stage and safe.
-
Select a location for the mounting bracket.
The perfect location for the mounting bracket is subsequent to your entrance door, at a peak of about 4 ft from the bottom. Make it possible for the placement you select is stage and that there are not any obstructions, akin to bushes or shrubs, that can block the view of the Ring Doorbell.
-
Mark the placement of the mounting holes.
Use a pencil to mark the placement of the 2 mounting holes on the wall. Make it possible for the marks are stage.
-
Drill the mounting holes.
Use a drill to drill two holes on the marks you made within the earlier step. The holes must be deep sufficient to accommodate the anchors that got here with the Ring Doorbell.
-
Insert the anchors.
Insert the anchors into the holes you simply drilled. Faucet the anchors in with a hammer till they’re flush with the wall.
-
Screw the mounting bracket to the wall.
Use the screws that got here with the Ring Doorbell to screw the mounting bracket to the wall. Make it possible for the mounting bracket is stage and safe.
Now that you’ve got put in the mounting bracket, you’re prepared to attach the doorbell wires and mount the Ring Doorbell.
Join doorbell wires.
Upon getting put in the mounting bracket, you want to join the doorbell wires to the Ring Doorbell. The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime.
To attach the doorbell wires, observe these steps:
-
Strip the ends of the doorbell wires.
Use a wire stripper to take away about 1/2 inch of insulation from the ends of the doorbell wires. -
Twist the ends of the doorbell wires collectively.
Twist the ends of the 2 doorbell wires collectively tightly. -
Insert the twisted wires into the terminals on the Ring Doorbell.
Insert the twisted wires into the “Entrance” and “Rear” terminals on the Ring Doorbell. Make it possible for the wires are inserted all the best way into the terminals and that they’re making good contact. -
Tighten the terminal screws.
Use a screwdriver to tighten the terminal screws till the doorbell wires are safe.
Now that you’ve got related the doorbell wires, you’re able to mount the Ring Doorbell to the mounting bracket.
Observe: In case you are putting in a Ring Doorbell Professional, additionally, you will want to attach the facility adapter to the Ring Doorbell Professional. The ability adapter plugs into an outlet close to your doorbell.
Mount Ring Doorbell.
Now that you’ve got related the doorbell wires, you’re able to mount the Ring Doorbell to the mounting bracket.
-
Align the Ring Doorbell with the mounting bracket.
Place the Ring Doorbell over the mounting bracket in order that the screw holes on the Ring Doorbell line up with the screw holes on the mounting bracket.
-
Insert the screws.
Insert the screws that got here with the Ring Doorbell into the screw holes. Make it possible for the screws are tight and that the Ring Doorbell is safe.
-
Stage the Ring Doorbell.
Use a stage to make it possible for the Ring Doorbell is stage. If the Ring Doorbell shouldn’t be stage, loosen the screws and modify the place of the Ring Doorbell till it’s stage.
-
Tighten the screws.
As soon as the Ring Doorbell is stage, tighten the screws till they’re comfortable.
Now that you’ve got mounted the Ring Doorbell, you may restore energy to the doorbell and check the Ring Doorbell.
Stage and safe Ring Doorbell.
Upon getting mounted the Ring Doorbell to the mounting bracket, you will need to stage and safe it.
-
Use a stage to examine if the Ring Doorbell is stage.
Place a stage on prime of the Ring Doorbell. If the bubble within the stage is centered, then the Ring Doorbell is stage. If the bubble shouldn’t be centered, then you want to modify the place of the Ring Doorbell till it’s stage.
-
Tighten the screws that safe the Ring Doorbell to the mounting bracket.
Use a screwdriver to tighten the screws that safe the Ring Doorbell to the mounting bracket. Make it possible for the screws are tight and that the Ring Doorbell is safe.
-
Apply silicone sealant across the edges of the Ring Doorbell.
This may assist to weatherproof the Ring Doorbell and forestall water harm. Use a caulk gun to use a skinny bead of silicone sealant across the edges of the Ring Doorbell.
-
Enable the silicone sealant to dry fully.
Earlier than you check the Ring Doorbell, permit the silicone sealant to dry fully. This may occasionally take a number of hours or in a single day.
Upon getting leveled and secured the Ring Doorbell, you may restore energy to the doorbell and check the Ring Doorbell.
Restore energy to doorbell.
Upon getting put in the Ring Doorbell and examined it, you may restore energy to the doorbell.
-
Activate the doorbell breaker.
Find the doorbell breaker in your house’s electrical panel. Flip the breaker to the “On” place. This may restore energy to the doorbell.
-
Check the Ring Doorbell.
Press the doorbell button to make it possible for the Ring Doorbell is working correctly. The Ring Doorbell ought to gentle up and you need to hear a chime inside your house.
-
Obtain the Ring app.
If you have not already executed so, obtain the Ring app from the App Retailer or Google Play Retailer. Create an account and observe the on-screen directions to attach your Ring Doorbell to your Wi-Fi community.
-
Arrange your Ring Doorbell.
As soon as your Ring Doorbell is related to your Wi-Fi community, you need to use the Ring app to arrange your Ring Doorbell. This consists of setting your movement detection settings, privateness settings, and notification settings.
Now that you’ve got restored energy to the doorbell and arrange your Ring Doorbell, you can begin utilizing it to watch your house and reply the door from anyplace.
Check Ring Doorbell.
Upon getting restored energy to the doorbell and related it to your Wi-Fi community, you need to check the Ring Doorbell to make it possible for it’s working correctly.
-
Press the doorbell button.
The Ring Doorbell ought to gentle up and you need to hear a chime inside your house.
-
Open the Ring app.
In your smartphone, open the Ring app and faucet on the Ring Doorbell that you just wish to check.
-
View the reside video feed.
You must now be capable to see a reside video feed from the Ring Doorbell. In case you do not see a reside video feed, examine to make it possible for the Ring Doorbell is related to your Wi-Fi community and that the Ring app is updated.
-
Check the movement detection.
Stroll in entrance of the Ring Doorbell and see if the movement sensor is triggered. The Ring Doorbell ought to ship you a notification in your smartphone when the movement sensor is triggered.
In case you are having issues testing your Ring Doorbell, you may contact Ring assist for assist.
FAQ
Have extra questions on putting in your Ring Doorbell? Take a look at these regularly requested questions and solutions.
Query 1: What instruments do I would like to put in my Ring Doorbell?
Reply 1: You’ll need a drill, a screwdriver, a stage, a hammer, a pencil, and a tape measure. Additionally, you will want the Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver.
Query 2: Do I would like to show off the facility to my doorbell earlier than I set up it?
Reply 2: Sure, you need to at all times flip off the facility to your doorbell prior to installing it. This may forestall any electrical shocks and guarantee you could work safely.
Query 3: How do I join the doorbell wires to the Ring Doorbell?
Reply 3: The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime. Twist the ends of the doorbell wires collectively and insert them into the terminals on the Ring Doorbell.
Query 4: How do I mount the Ring Doorbell to the wall?
Reply 4: First, set up the mounting bracket on the wall. Then, align the Ring Doorbell with the mounting bracket and insert the screws. Make it possible for the Ring Doorbell is stage and safe.
Query 5: How do I check my Ring Doorbell?
Reply 5: Upon getting put in the Ring Doorbell, activate the facility to the doorbell and press the doorbell button. The Ring Doorbell ought to gentle up and you need to hear a chime inside your house. You may as well check the movement detection by strolling in entrance of the Ring Doorbell.
Query 6: What do I do if I am having issues putting in my Ring Doorbell?
Reply 6: In case you are having issues putting in your Ring Doorbell, you may contact Ring assist for assist.
Query 7: Can I set up my Ring Doorbell myself?
Reply 7: Sure, you may set up your Ring Doorbell your self. Nonetheless, if you’re not comfy working with electrical wiring, you might wish to rent knowledgeable to put in it for you.
Closing Paragraph for FAQ: These are just some of essentially the most regularly requested questions on putting in a Ring Doorbell. When you’ve got another questions, please seek the advice of the Ring Doorbell consumer guide or contact Ring assist.
Now that you know the way to put in a Ring Doorbell, listed here are just a few suggestions that can assist you get essentially the most out of your new doorbell.
Suggestions
Listed here are just a few suggestions that can assist you get essentially the most out of your new Ring Doorbell:
Tip 1: Select the proper location to your Ring Doorbell.
The perfect location to your Ring Doorbell is subsequent to your entrance door, at a peak of about 4 ft from the bottom. Make it possible for the placement you select is stage and that there are not any obstructions, akin to bushes or shrubs, that can block the view of the Ring Doorbell.
Tip 2: Use a powerful Wi-Fi sign.
The Ring Doorbell requires a powerful Wi-Fi sign to operate correctly. When you’ve got a weak Wi-Fi sign within the space the place you wish to set up the Ring Doorbell, you might want to make use of a Wi-Fi extender or booster to enhance the sign energy.
Tip 3: Arrange movement detection and notifications.
The Ring Doorbell has a built-in movement sensor that can be utilized to set off notifications in your smartphone. You may customise the movement detection settings to solely obtain notifications for sure sorts of movement, akin to folks or autos.
Tip 4: Join your Ring Doorbell to different good dwelling units.
The Ring Doorbell might be related to different good dwelling units, akin to good lights and good locks. This lets you create automated actions, akin to turning on the lights when somebody rings the doorbell or unlocking the door while you reply the doorbell out of your smartphone.
Closing Paragraph for Suggestions: By following the following tips, you will get essentially the most out of your new Ring Doorbell and revel in the entire advantages that it has to supply.
Now that you know the way to put in and use your Ring Doorbell, you may benefit from the peace of thoughts that comes with realizing you could monitor your house and reply the door from anyplace.
Conclusion
Putting in a Ring Doorbell is a good way to enhance the safety of your house and regulate your property. By following the steps on this information, you may simply set up your Ring Doorbell your self and begin having fun with the entire advantages that it has to supply.
Abstract of Major Factors:
- Flip off the facility to your doorbell earlier than you start set up.
- Take away your present doorbell.
- Set up the mounting bracket.
- Join the doorbell wires to the Ring Doorbell.
- Mount the Ring Doorbell to the mounting bracket.
- Stage and safe the Ring Doorbell.
- Restore energy to the doorbell.
- Check the Ring Doorbell.
Closing Message: Together with your Ring Doorbell put in, now you can take pleasure in peace of thoughts realizing you could monitor your house and reply the door from anyplace. You may as well use the Ring Doorbell to attach with different good dwelling units and create automated actions to make your house much more safe and handy.
